Professional ATV Repairs and Upgrades in Bowstring, MN
Bowstring sits 15 miles north of Deer River on MN-6, right where County Road 133 comes in. If your quad is sputtering out there, our ATV repair shop in Hibbing is about 67 miles down the road. Han's Motosports & Suspension is family-owned, open since January 1998, and you deal directly with the owner.
Somebody in Bowstring typing "ATV repair near me" into a phone is going to see a drive either way. Ours is worth it. We handle off-road vehicle repairs on quads, side-by-sides, sleds, dirt bikes and motorcycles, all under one roof on Bunker Road.
ATV Repair for a Sputtering Quad in Bowstring
A quad that sputters, bogs or won't idle usually comes down to fuel, air or spark. ATV repair here starts with finding the real cause. Then we fix it: carburetor rebuilding, motor repair or a full rebuild on ATVs and side-by-sides. The whole list is on our ATV and side-by-side repair page.
Regular ATV maintenance keeps the small problems small. We're bonded and insured, and we can write the estimate if a quad or side-by-side is part of an insurance claim.
Suspension Service for Bowstring State Forest Routes
The Bowstring State Forest covers Itasca and Cass county ground inside the Chippewa National Forest, and its trails allow Class I and II ATVs. The DNR has listed it as a limited forest, where machines stay on signed and mapped routes. Check the current DNR rules before you load up.
Those routes beat on shocks. We rebuild shocks and forks, revalve, change springs, install new shocks and fit HSPD steering dampers. We're a Race Tech and Ride Concept dealer. Read more about our shock and fork rebuilds.
Same Day ATV Service for Bowstring Lake Weekends
Machine quit on the way to the south public access on Bowstring Lake, by MN-6 and County Road 14? A quick fix may not have to wait. Carb cleaning, belt replacement or a suspension adjustment can often be done the same day, whenever possible.
Bowstring was settled in the 1920s, and the community telephone booth mattered here until cell service showed up in the 1980s. Reaching us is easier now. During working hours every call gets answered, or a missed call gets returned within an hour.
Snowmobile Repair for Trail 309, Bowstring W
The DNR's 2021 grant-in-aid list shows Itasca County trail 309, Bowstring W, at 58.7 miles. That's a lot of winter on one sled.
We work on engines, clutching and shocks, and sled shocks can come in off the machine if that's easier to haul. In-house snowmobile tuning sets the motor up for how you ride. See our sled service page.
ATV Upgrades and UTV Upgrades Near Bowstring
We sell and install aftermarket parts. As a Western Power Sports dealer, we can order powersports parts and off-road equipment: tires, wheels, tracks, suspension kits and components, cables, brakes, drive parts, and ATV and UTV accessories.
We're also a Duraclutch dealer. Ask about aftermarket installs for your quad when you call, and we'll talk it through before anything gets ordered.
Torque Link Remapping for Bowstring Side-by-Sides
We do our tuning in-house on ATVs, side-by-sides and sleds. A Torque Link remap is a smarter tune. You get stronger torque, quicker throttle response and more power where you need it.
You feel it on a loaded machine on the gravel roads around the Bowstring River. Less bogging. Better pull.
ATV Plows for Bowstring Driveways Off County Road 133
Winter comes early this far north. We sell, install and repair KFI, Warn and Eagle plows for ATVs and UTVs, and we handle the winch and electrical side too.
If your blade won't lift or the winch went dead, bring it in. Plow details are on our ATV and UTV plow page.
Dirt Bike Repair and Dirt-to-Snow Track Kits in Bowstring
Dirt bikes get the same care as quads: maintenance, tires and motor rebuilds. Our dirt bike service page lays it out.
Don't want to park the bike all winter? We install Camso conversions so a dirt bike can ride snow.
Motorcycle Repair and Spoked Wheels for Bowstring Riders
We work on all major motorcycle brands: tune-ups, carb repair and motor work. Street bike or old project, it gets looked at the same way.
Bent rim or loose spokes? We do wheel lacing and truing for motorcycle and dirt bike wheels.
Towns Around Bowstring We Also Serve
Bowstring shares back roads with Talmoon, Jessie Lake, Marcell, Inger and Deer River. Neighbors in Marcell and Inger get the same shop and the same phone number. Anyone along MN-6 looking up an ATV repair shop near me will find us at 3034 Bunker Rd in Hibbing.
- Bowstring
- Talmoon
- Jessie Lake
- Marcell
- Inger
- Deer River
Bowstring ATV Repair Questions
How far is Han's Motosports & Suspension from Bowstring, MN?
About 67 miles. From Bowstring, take MN-6 south about 15 miles to Deer River, then US-2 east about 15 miles to Grand Rapids, then US-169 east into Hibbing. The shop is at 3034 Bunker Rd.
What are your hours for Bowstring customers?
Monday to Friday, 8:30 am to 5 pm. Saturday by appointment. Closed Sunday. Call (218) 969-0900.
Can a sputtering quad from Bowstring be fixed the same day?
Sometimes. Quick fixes like carb cleaning, belt replacement or a suspension adjustment can be done the same day whenever possible. Call ahead so we know it is coming.
Can I ride my ATV in the Bowstring State Forest?
Its trails allow Class I and II ATV use. The DNR has listed it as a limited forest, where OHVs ride only on signed and mapped routes. Rules change, so check current DNR rules before you ride.
Do you work on snowmobiles from the Bowstring area?
Yes. We handle engines, clutching and shocks, plus in-house tuning. Shocks can come in off the sled.
Do you sell and install plows for Bowstring ATV owners?
Yes. We sell, install and repair KFI, Warn and Eagle plows, along with winch and electrical work.
Will you call me before doing major work on my Bowstring machine?
Yes. We talk with you before any major work starts.
Who do I deal with when I call from Bowstring?
The owner. Han's is family-owned and has been in business since January 1998.
Get Your Bowstring Quad Running Right
Call (218) 969-0900 or send us a message. Tell us what the machine is doing and we'll talk it over before any major work. Every machine is treated like it's our own.